RCM for Mining and Minerals Operations

massive low-speed high-load equipment requires specialized monitoring techniques different from standard industrial rotating machinery. In this environment, equipment failures cause throughput losses at $50K–$500K per day depending on commodity price, plus MSHA enforcement actions. Our SAE JA1011-compliant RCM analysis program specifically targets crushers, SAG/ball mills, overland conveyors, haul truck power trains, slurry pumps, and screening decks — the assets where early detection has the greatest impact on tons processed per day and crusher/mill availability. We also account for remote locations, adapting our measurement approach to maintain data quality despite these operating conditions.

Yes. Mining & Minerals facilities must comply with MSHA (30 CFR Parts 46/48/56/57), EPA NPDES permits, and equipment-specific standards for conveyors and crushers. Our SAE JA1011-compliant RCM analysis program generates the condition documentation needed for msha part 56/57 equipment inspection documentation and workplace examination records. Beyond compliance, the condition data drives measurable improvements in tons processed per day and crusher/mill availability by converting unplanned failures into scheduled repairs. Most mining & minerals clients see meaningful reductions in throughput losses at $50k–$500k per day depending on commodity price within the first 12 months of program implementation.

Run the math against $20K-$100K/hour for haul fleet down for downtime cost. A single avoided unplanned shutdown on a critical asset usually pays for six to twelve months of program cost. Most Mining sites we work with see 3:1 to 6:1 program ROI inside year one, with higher figures at sites with higher hourly downtime costs. Sites with very high downtime costs ($100K/hr+ in some Mining operations) can see 10:1 or better.

Where MSHA, EPA water quality requires documented preventive maintenance and equipment condition tracking, RCM data provides the audit-ready evidence. Measurements traceable to SAE JA1011 and JA1012, calibrated instrumentation records, written procedures, and finding-to-work-order tie-back. The program isn't structured to be a compliance tool — but the data it generates as a byproduct usually closes 60 to 80 percent of an inspector's questions about equipment condition.