Vibration Analysis for Metals and Steel Facilities

thermal cycling between ambient and extreme heat zones causes differential expansion that shifts alignment and accelerates bearing degradation. In this environment, equipment failures cause heat loss in steelmaking at $20K–$100K per event, slab quality defects, and safety incidents near molten metal. Our spectral vibration measurement program specifically targets rolling mill drives, continuous caster oscillators, ladle cranes, furnace fans, descale pumps, and hydraulic power units — the assets where early detection has the greatest impact on heats per day and yield loss rate. We also account for extreme temperature exposure from molten metal handling, heavy shock loads, and abrasive dust contamination, adapting our measurement approach to maintain data quality despite these operating conditions.

Yes. Metals & Steel facilities must comply with OSHA general industry, EPA air quality permits, and NFPA 86 for furnace safety. Our spectral vibration measurement program generates the condition documentation needed for epa title v air permit compliance dependent on pollution control fan and baghouse reliability; crane inspection documentation for osha. Beyond compliance, the condition data drives measurable improvements in heats per day and yield loss rate by converting unplanned failures into scheduled repairs. Most metals & steel clients see meaningful reductions in heat loss in steelmaking at $20k–$100k per event within the first 12 months of program implementation.