Equipment Condition Assessment for Oil and Gas Operations

geographically dispersed assets with inconsistent connectivity and extreme environmental conditions from arctic cold to desert heat. In this environment, equipment failures cause production deferral at $10K–$100K per day, flaring, safety incidents, and environmental releases. Our multi-technology baseline condition evaluation program specifically targets gas compressors, pipeline pumps, turbine generators, fin-fan coolers, and produced water injection pumps — the assets where early detection has the greatest impact on production uptime and deferrals avoided. We also account for extreme weather exposure and limited on-site staff, adapting our measurement approach to maintain data quality despite these operating conditions.

Yes. Oil & Gas facilities must comply with API 670/610/618 machinery standards, OSHA PSM, and BSEE regulations for offshore operations. Our multi-technology baseline condition evaluation program generates the condition documentation needed for api 670 continuous monitoring compliance for critical machinery and psm mechanical integrity audit readiness. Beyond compliance, the condition data drives measurable improvements in production uptime and deferrals avoided by converting unplanned failures into scheduled repairs. Most oil & gas clients see meaningful reductions in production deferral at $10k–$100k per day within the first 12 months of program implementation.

Run the math against $25K-$120K/hour for production for downtime cost. A single avoided unplanned shutdown on a critical asset usually pays for six to twelve months of program cost. Most Oil & Gas sites we work with see 3:1 to 6:1 program ROI inside year one, with higher figures at sites with higher hourly downtime costs. Sites with very high downtime costs ($100K/hr+ in some Oil & Gas operations) can see 10:1 or better.

Where API 670, OSHA PSM, EPA RMP requires documented preventive maintenance and equipment condition tracking, Equipment Condition Assessment data provides the audit-ready evidence. Measurements traceable to ISO 17359 framework, calibrated instrumentation records, written procedures, and finding-to-work-order tie-back. The program isn't structured to be a compliance tool — but the data it generates as a byproduct usually closes 60 to 80 percent of an inspector's questions about equipment condition.